After the tricky fences we also can work out the better concealing ones.... takes also less then 5 minutes.
For this purpose I took the same stuff for cleaning ears.. but you can also use the toothpicks if you bought them for the other projects
So here we go...
What do we need ..
Materials:
Tongue depressor
Toothpicks (Partysticks) / or earcleaners
Superglue
Step 1:
No coffee today.... take a look at the gathered materials
Step 2:
Superglue the lowest "log"row directly on the tongue depressor.
Step 3:
Use the lowest row as hold for glueing one (NOT BOTH!) side of the upright standing logs of your fence. Place as many as desired....
Step 4:
Build up one to two more log rows like Step 2.. but simply superglue them to the pins as well as to the row below.
Step5:
Superglue the other upright standing parts of your fence
Step 6:
Superglue the last row... paint and flock as desired... enjoy your result
All around Wargaming with Flames of War. Also Terrain Building, Painting and WIP/Tutorials
Samstag, 30. November 2013
Freitag, 29. November 2013
Flames of War - Tutorial - Fences (the tricky ones)
Today it is time to again work a bit around on something that takes less then 5 minutes for at least 2 parts of todays fences.
Everyone knows the classic ones. Being a one piece cast thing totally shutting down any view and giving concealment to troops. Why should that always be the case ? Why cant a fence not be a hinderance for advancing troops instead of giving concealment ? ....
So here we go...
What do we need ..
Materials:
Tongue depressor
Toothpicks (Partysticks)
Superglue
and thats it....
Step 1: Did I state that I like coffee ... so lets start with one upfront and have a few on our materials
Step 2:
The more tricky variaton.. Superglue upright standing "bolts" on your base.
Step 3:
Put a lose layer (I took two here) on a 180 degree ankle on your base. In my case it is 2 toothpicks... Why ? Because a fence does not start on the bottom but somethere on the first third.
Step 4:
Superglue toothpicks from one upright "bolt" to another. To give the more hold we first layed the 180 degree toothpicks. So you can simply go ahead and place your fence parts simply in 180 degree again on the already existing bolts.
Step 5:
as seen on the picture and
Step 6:
Equal steps 3 and 4.
Step 7:
Base as desired and enjoy your result.....
Everyone knows the classic ones. Being a one piece cast thing totally shutting down any view and giving concealment to troops. Why should that always be the case ? Why cant a fence not be a hinderance for advancing troops instead of giving concealment ? ....
So here we go...
What do we need ..
Materials:
Tongue depressor
Toothpicks (Partysticks)
Superglue
and thats it....
Step 1: Did I state that I like coffee ... so lets start with one upfront and have a few on our materials
Step 2:
The more tricky variaton.. Superglue upright standing "bolts" on your base.
Step 3:
Put a lose layer (I took two here) on a 180 degree ankle on your base. In my case it is 2 toothpicks... Why ? Because a fence does not start on the bottom but somethere on the first third.
Step 4:
Superglue toothpicks from one upright "bolt" to another. To give the more hold we first layed the 180 degree toothpicks. So you can simply go ahead and place your fence parts simply in 180 degree again on the already existing bolts.
Step 5:
as seen on the picture and
Step 6:
Equal steps 3 and 4.
Step 7:
Base as desired and enjoy your result.....
Donnerstag, 28. November 2013
Flames of War - Tutorial - Entrenchment Markers (easy way)
After looking around on the web in search of entrechment markers I was wondering why there is a prize for approx 15 Euros or 12 british pounds for a bit of markers... ok they come prepainted and possibly also with some flock... too expensive in my opinion.
So lets take a look at them closer and substitude some things.
Scaling...
always the worse problem to encounter... I scaled mine to approx half of the width of a small base. Means you take your small base. Place it and then use half of the smallest side. Thats my base width.
For its length I took two medium sized infantry platoon bases and put them next to each other. With this I still keep the opportunity to work out a complete entrenchment for a much lengthier part.. e.g. dug in platoon etc.
With this settled.... start ...
Substitution....
Materials needed:
The base I have done upfront
Partysticks
Superglue
Filler
Step 1:
Make sure you have everything by hand... enjoy your coffee....
Cut the partysticks to an even length. I personally dont like the more upper and lower parts.. I only took the middle part from it.
Step 2:
Use some rest from your base cutting part and glue it on top of the base. Afterwards Superglue the Partysticks alongside.
Step 3:
Cut some smaller parts from the partysticks as to stabilize the thing.
Step 4:
Use filler to get some sort of upwards hill to your entrechment.
Step 5:
Wait till dry.. Decorate, Prime, paint and flock it as desired.... and, of course, have fun....
P.S.: Time on this one is nothing more than 5 Minutes......
So lets take a look at them closer and substitude some things.
Scaling...
always the worse problem to encounter... I scaled mine to approx half of the width of a small base. Means you take your small base. Place it and then use half of the smallest side. Thats my base width.
For its length I took two medium sized infantry platoon bases and put them next to each other. With this I still keep the opportunity to work out a complete entrenchment for a much lengthier part.. e.g. dug in platoon etc.
With this settled.... start ...
Substitution....
Materials needed:
The base I have done upfront
Partysticks
Superglue
Filler
Step 1:
Make sure you have everything by hand... enjoy your coffee....
Cut the partysticks to an even length. I personally dont like the more upper and lower parts.. I only took the middle part from it.
Step 2:
Use some rest from your base cutting part and glue it on top of the base. Afterwards Superglue the Partysticks alongside.
Step 3:
Cut some smaller parts from the partysticks as to stabilize the thing.
Step 4:
Use filler to get some sort of upwards hill to your entrechment.
Step 5:
Wait till dry.. Decorate, Prime, paint and flock it as desired.... and, of course, have fun....
P.S.: Time on this one is nothing more than 5 Minutes......
Dienstag, 26. November 2013
Flames of War - Tutorial - Building Wood Trees the njami way
Still cheaper then the last one but takes more time is this variation. Suits perfect for more mediterrain environments etc.. is also quite easy scaleable up to 28mm. The earstick variation is a bit ... well lets say limited... :)
What you need:
- Grapes (red or green one ... doesnt matter) from the supermarket
- Base
- Superglue
- Flock
- Miliput or other putty
Step 1:
After buying the grapes.. enjoy them (NJAMI) but dont throw away the part they grow on.. thats the thing we need. Let it dry out for a week and then go ahead (you can also start right away ... I just like the dry variation a bit more)
Step 2:
Use Superglue and miliput to get your "tree" stand up the way you like it to be.
Step 3:
Superglue Flock on the parts there your fruits have been growing. Much space here to attach something.
Step 4:
Wait till everything dryed and do your basing...
Enjoy your lovely result
What you need:
- Grapes (red or green one ... doesnt matter) from the supermarket
- Base
- Superglue
- Flock
- Miliput or other putty
Step 1:
After buying the grapes.. enjoy them (NJAMI) but dont throw away the part they grow on.. thats the thing we need. Let it dry out for a week and then go ahead (you can also start right away ... I just like the dry variation a bit more)
Step 2:
Use Superglue and miliput to get your "tree" stand up the way you like it to be.
Step 3:
Superglue Flock on the parts there your fruits have been growing. Much space here to attach something.
Step 4:
Wait till everything dryed and do your basing...
Enjoy your lovely result
Sonntag, 24. November 2013
Flames of War - Tutorial - Building Wood Trees the cheap way
Was a bit quite lately , but work and a serious blood infection really chained me to the bed and far away from anything that had to do with wargaming or similar stuff.
I often find myself on websites offereing the different sorts of trees suitable for wargaming. Most often I am also wondering which size does matter to 15mm and Flames of War... the answer I finally found in my bathroom....
What you need:
- Earsticks for cleaning your ears (pls unused !)
- Miliput or other putty
- a base
- Superglue
- Flock
Step 1:
Take all the stuff you need and crosscheck if you have everything... have a cup of coffee.
Step 2:
Take the earsticks and superglue them to your base. Afterwards put some miliput or putty around it.
After crosschecking both variants (with or without the stuff you clean your ears with I highly recommend the ones with that stuff)
Step 3:
Superglue flock as desired to your stick... et voila... tres chic :)
Step 4:
Do your basing stuff around it and it should blend perfectly to your gaming table. Doesnt cost a fortune and is easy to make within 2 Minutes.
I often find myself on websites offereing the different sorts of trees suitable for wargaming. Most often I am also wondering which size does matter to 15mm and Flames of War... the answer I finally found in my bathroom....
What you need:
- Earsticks for cleaning your ears (pls unused !)
- Miliput or other putty
- a base
- Superglue
- Flock
Step 1:
Take all the stuff you need and crosscheck if you have everything... have a cup of coffee.
Step 2:
Take the earsticks and superglue them to your base. Afterwards put some miliput or putty around it.
After crosschecking both variants (with or without the stuff you clean your ears with I highly recommend the ones with that stuff)
Step 3:
Superglue flock as desired to your stick... et voila... tres chic :)
Step 4:
Do your basing stuff around it and it should blend perfectly to your gaming table. Doesnt cost a fortune and is easy to make within 2 Minutes.
Abonnieren
Posts (Atom)